Just replaced coils on my GS1000

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #1

    Just replaced coils on my GS1000

    I bought the two coils from 4into1 company out of San Francisco. They are exactly like the Dynatek coils but black and don't say Dynatek on them. Comes with
    new plug wires and all the hardware needed. All this for $95 compaired to $155 for the Dynatek coils alone. Z1 Interprises sells a single plug wire foe $17. the bike runs excellent now.
  • rphillips
    Forum Guru
    Past Site Supporter
    Super Site Supporter
    • Jun 2005
    • 7611
    • Norene TN

    #2
    Love good results & more reasonable prices than any dealer (stealer)
    1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

    Comment

    • steve murdoch
      Forum Guru
      Past Site Supporter
      • May 2004
      • 8491
      • St. Catharines, On.

      #3
      Originally posted by Doug VK
      I bought the two coils from 4into1 company out of San Francisco. They are exactly like the Dynatek coils but black and don't say Dynatek on them. Comes with
      new plug wires and all the hardware needed. All this for $95 compaired to $155 for the Dynatek coils alone. Z1 Interprises sells a single plug wire foe $17. the bike runs excellent now.
      Are they the 5 ohm coils?
      Have you got a part number? They have many different sets.
      Parts and accessories for vintage Honda motorcycles from the 60's, 70's & 80's.
      2@ \'78 GS1000

      Comment

      • Guest

        #4
        I'm running the Dynatec S ignition so I got the 3 ohm.

        Comment

        • mvalenti
          Forum Mentor
          • Nov 2009
          • 748
          • Haverhill, MA

          #5
          I can say I had my first failure with Dyna coils in over 7 years.
          -Mark
          Boston, MA
          Suck Squeeze Bang Blow..
          sigpic
          1980 GS850G with 79 carbs.....

          Comment

          Working...