Weird Tachometer Issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • danny01975
    Forum Mentor
    Super Site Supporter
    • Jun 2024
    • 194
    • Lafayette, Louisiana
    #1

    Weird Tachometer Issue

    This morning I went for a ride and I noticed my tach wasn't working at all. The threaded ferrule on the tach side sometimes comes loose and the cable drops out. When I got where I was going, I checked it and it was tight. I removed the cable from the tach and noticed it wasn't spinning. I grabbed the end and pushed it down into the cable and it started spinning. Weird but ok. I threaded it back in and once again, nothing.
    What's going on here? Why is the rod part of the cable not staying put when it's in the tach?
    Tags: None
    • rphillips
      Forum Guru
      Past Site Supporter
      Super Site Supporter
      • Jun 2005
      • 7609
      • Norene TN
      #2
      If you're working on some model of a GS Suzuki, I'd try, Grab the end and pull it out of the cable and see what happens. Hopefully part of it will pull all the way out. Simple fix, new cable. If you're working on something else it may be different.
      Last edited by rphillips; 04-07-2025, 09:37 AM.
      1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

        Comment

        • danny01975
          Forum Mentor
          Super Site Supporter
          • Jun 2024
          • 194
          • Lafayette, Louisiana
          #3
          Originally posted by rphillips
          If you're working on some model of a GS Suzuki, I'd try, Grab the end and pull it out of the cable and see what happens. Hopefully part of it will pull all the way out. Simple fix, new cable. If you're working on something else it may be different.
          Sorry, I should have posted the bike I'm working on. It's an 82 GS1100 GK. Should I be able to pull the rod all the way out of the cable, or not? If I remember correctly, my speedo cable came all the way out. I greased it and put it back in. No issues.

            Comment

            • rphillips
              Forum Guru
              Past Site Supporter
              Super Site Supporter
              • Jun 2005
              • 7609
              • Norene TN
              #4
              You can pull it out from the bottom, if you pull it out from the tach end, it's broke.
              1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

                Comment

                • danny01975
                  Forum Mentor
                  Super Site Supporter
                  • Jun 2024
                  • 194
                  • Lafayette, Louisiana
                  #5
                  Originally posted by rphillips
                  You can pull it out from the bottom, if you pull it out from the tach end, it's broke.
                  Oh, so you mean it should not move up towards the tach, but should be inserted and removed from the bottom (engine side)? If that's the case, then yes. Apparently its broke!

                    Comment

                    • Rich82GS750TZ
                      Forum Guru
                      Past Site Supporter
                      Super Site Supporter
                      • Jun 2018
                      • 5564
                      • Mifflinburg, PA / Land of Tar & Chip
                      #6
                      I happens. This is the pic of the engine end of my tach cable a few weeks ago. Worked when I parked the bike up for the winter. Broken on first run this spring. Yes, if you can pull the innards up through the top, it's broken. You'll see when you undo the bottom end.
                      Links
                      ​

                        Comment

                        • danny01975
                          Forum Mentor
                          Super Site Supporter
                          • Jun 2024
                          • 194
                          • Lafayette, Louisiana
                          #7
                          Confirmed. I pulled it off and the slotted end stayed on the engine! Ordered a new one.

                          Thanks for the help!

                            Comment

                            Previous template Next
                            Working...