Announcement

Collapse
No announcement yet.

GS1000S tripmeter won’t reset?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS1000S tripmeter won’t reset?

    Like the subject says….

    Ever since I bought my 1980 GS1000S earlier this year, the tripmeter has given me fits. Sometimes, it resets with a single push. Other times, it takes a dozen or more attempts before it suddenly resets. Today, nothing would make it work. I wiggled and pushed and twisted and everything I could think of, with no luck.

    Does anybody have any words of wisdom to share? Fortunately the fuel gauge works, but I very much like using my tripmeter for a gas remaining sanity check….

    #2
    I bought an 81 1100E, it would not reset except on a rare occasion, I bought a different gauge cluster, it would not re-set either. I sprayed some WD 40 in from behind, and while trying to turn the numbers with my finger something went snap and now it works. I got it further apart and cleaned the inside of the lens and the face. I turned the odometer with a drill and an old piece of speedometer cable, it repeatedly re-set.
    I have not installed it into the bike yet, but I got new niche brake rotors today and plan to service the neck bearings and swap the gauges too.

    Comment


      #3
      Good luck, hope it's all good... Also my "83" GS1100E the trip quit resetting.
      1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

      Comment


        #4
        If it becomes untenable for you, I know a gauge rebuilder dude that can help. Send me a private message if you want contact info.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment

        Working...
        X