Valve Guide Seals

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 1980GS1000E
    Forum Sage
    Past Site Supporter
    • Aug 2007
    • 1665
    • San Diego, California, USA
    #1

    Valve Guide Seals

    It's been since I have posted, or even browsed this forum, I am glad to see this forum is still active somewhat. My question is if there is a viton valve stem seal out there, I am thinking of changing mine out.
    Current Rides: 1980 Suzuki GS1000ET, 2006 H-D Fatboy, 2021 BMW K1600B
    Tags: None
    • Rich82GS750TZ
      Forum Guru
      Past Site Supporter
      Super Site Supporter
      • Jun 2018
      • 5580
      • Mifflinburg, PA / Land of Tar & Chip
      #2
      I bought mine on e-bay. Working great so far. These were for a 16-valve 750. May be a different size for an 8-valve 1000 engine. I really don't know.
      Pardon Our Interruption...
      https://ebay.us/m/eypoBT


      Links​

        Comment

        • zed1015
          Forum Mentor
          • Oct 2020
          • 413
          • North Lincolnshire - UK .
          #3
          Originally posted by 1980GS1000E
          It's been since I have posted, or even browsed this forum, I am glad to see this forum is still active somewhat. My question is if there is a viton valve stem seal out there, I am thinking of changing mine out.
          Viton seals for the GS1000 are readily available.
          Here's some from Streetsports Industries in the US.

          Suzuki GS750 GS850 GS1000 GS1100 VITON "ALL YEARS" - Valve Seals - Set of 8 NEW | eBay UK
          Mikuni Viton Choke Plunger Seat Renewal.
          VITON Choke plunger seals .KAWASAKI Z1,Z900,Z650,Z1000,Z1R,SUZUKI GS1000,GSXR,RF | eBay

          Air Corrector Jets for Mikuni VM 24, 26 and 28mm carbs .
          https://www.ebay.co.uk/itm/254380193...84.m1555.l2649



          sigpic

            Comment

            • Big T
              Forum LongTimer
              Past Site Supporter
              Super Site Supporter
              • Mar 2005
              • 12397
              • West Slope, OR
              #4
              Z1 Enterprises has them
              1978 GS 1000 (since new)
              1979 GS 1000 (The Fridge, superbike replica project)
              1978 GS 1000 (parts)
              1981 GS 850 (anyone want a project?)
              1981 GPZ 550 (backroad screamer)
              1970 450 Mk IIID (THUMP!)
              2007 DRz 400S
              1999 ATK 490ES
              1994 DR 350SES

                Comment

                • Brendan W
                  Forum Sage
                  Past Site Supporter
                  • Jul 2013
                  • 4926
                  • Wexford, Ireland
                  #5
                  Originally posted by 1980GS1000E
                  It's been since I have posted, or even browsed this forum, I am glad to see this forum is still active somewhat. My question is if there is a viton valve stem seal out there, I am thinking of changing mine out.
                  Could I ask why you are considering doing that?
                  97 R1100R
                  Previous
                  80 GS850G, 79 Z400B, 85 R100RT, 80 Z650D, 76 CB200

                    Comment

                    • rphillips
                      Forum Guru
                      Past Site Supporter
                      Super Site Supporter
                      • Jun 2005
                      • 7620
                      • Norene TN
                      #6
                      I's wondering the same thing. Didn't mention a problem, just thinking of changing them.
                      1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

                        Comment

                        Previous template Next
                        Working...