Bushings and Caged Bearings

[JEEPRUSTY]

I was wondering if any of you have a source for standard sizes of brass bushings or caged bearings.

I suppose nylon would do.

[rapidray]

SPECIFICALLY what IDs, ODs & widths? Ray.

[JEEPRUSTY]

This is to take slop out of a linkage.
There is a steel shaft 25 mm long 12mm in diameter.

I do not know the correct terms but I need to have a bushing that will fit inside of a tube that is 11.8 mm.

[JEEPRUSTY]

looking around I guess this falls into the realm of shim stock not an actual bushing