If I wanted to replace all my carb screws...

[7981GS]

Did you guys use antiseize on these screws since they are SS? Didn't know if that mattered with the carbs.

I use it on ALL screws and bolts that don't require Lok-tite.

Daniel

[Good Times]

I use it on ALL screws and bolts that don't require Lok-tite.

Daniel

Sweet. I'll invest in some.

[old_skool]

I use the brake anti-seize that looks copper in color with a brush for application

[Mike]

I found mine at Ace Hardware, they have a good metric selection.

Ditto. Couldn't have been more than $5-7 for the set.

[Good Times]

Got my screw kit in the mail yesterday as promised. Pleased with what I received.

[GateKeeper]

So the kit only includes enough screws for the tops and bottoms, but nothing for the rails ? right

This is why I went and purchased mine individually

[old_skool]

Here's where I got my other screws for the rails http://www.ebay.com/itm/300584654906...84.m1439.l2649

[Good Times]

So the kit only includes enough screws for the tops and bottoms, but nothing for the rails ? right

This is why I went and purchased mine individually

Correct. No float bowl screws either. I'll see if I can find the other screws locally.

[GateKeeper]

Float bowl screws are original, I did not change those.....

[old_skool]

I've bought a lot of hardware in the past from this guy

http://www.ebay.com/sch/stainlesscycle/m.html?item=260916495287&sspagename=STRK%3AMEWNX%3AIT&_trksid=p3984.m1439.l2649&_trksid=p4340.l2562

[ny_redneck04]

Have you looked @ boltdepot.com?? you can buy 1 or a 100 and seems to be reasonably priced

[ddaniels]

I believe our own Robert Barr sells bolt kits too correct? I think that's where I got mine. And, you don't need to replace the float bowl screws since they are hex on the o.d. anyway.

[GateKeeper]

I believe our own Robert Barr sells bolt kits too correct? I think that's where I got mine. And, you don't need to replace the float bowl screws since they are hex on the o.d. anyway.

Only the 8 required for the intake boot/tubes