GS1000 Frame fastener sizes please help.

[Wabbit]

I am trying to find the correct sizes required for a GS1000 frame.
I need the engine to frame mounting bolts, also everything else.

The engine bolts are easy as they sell kits here in the UK, but nothing listed for the frame fasteners, particularly the engine to frame mounts.

Does anyone have UK sizes to make life a little easier?
I think the thread pitch is 1.25 this could be wrong?

Looking to replace all the fasteners on the frame, so all help appreciatted.
Please help as need to start building this thing.
Thank you all. ;D

[beamer12]

Wabbit
1.25 pitch shoul be 8mm i think, 12 or 13mm hex head or 6mm allen bit`s are the standard size`s.
Beamer12

[Agemax]

Inox fasteners in the UK do complete stainless fitting kits for the GS1000, almost everything you need for the whole bike. not cheap but quality stainless. you can buy the whole kit in one go or just buy the seperate kits for the areas you need.

http://www.inoxbolt.co.uk/pdf%20files/Suzuki/GS1000Spdf04_04.pdf

[Wabbit]

Thank you so much, very much appreciatted.