Hi everyone, when I ride my 850 on the Interstate, it seem that the engine is really running hard. Is this Ok? At 60 mph, the engine is running around 4500rpm. At 70, it's a little over 5000,but the engine sounds like it is screeming. Thanks, Mark
-
-
Normal.
Installing a 2.90 final drive will drop the rpm's a little. I did that on one bike and liked the change.
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Comment
-
You should hear it scream when you don't let the revs drop below 6,000!
Check out a dyno chart for your engine, you'd be surprised where your bike makes all its' power.
Keeping rpms at or below 5,000 is like having a nice big swimming pool but only ever using the shallow end.Comment
-
its annoying, but it won't hurt anything. Well synchronized carbs and and a valve adjustment makes it smoother, but a 1000 or 1100 is more relaxed at speed.sigpic Too old, too many bikes, too many cars, too many things
Comment
-
These engines are tiny and designed for high RPM power, they need to spin fast to run efficiently.Comment
-
Hi,
My GS850GT runs at 70 mph, 5000 rpm all day long and it's very happy.
Just keep up all the maintenance, valve adjustments, fluids, filters, etc, and you'll have no worries.
Thank you for your indulgence,
BassCliffComment
Comment