Announcement

Collapse
No announcement yet.

Gas tank/petcock leak.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Gas tank/petcock leak.

    I rebuilt the petcock on my 77 gs750. When I first became a member I was told the petcock rebuild kits are hit or miss. I have a small, but noticeable leak between the petcock and the tank. Is there any remedy for this? A new petcock? New tank?

    #2
    Is the leak between the body of the petcock and the tank (i.e. where the o-ring makes contact)? Solution...clean the mating surface and put in a new o-ring.

    Or is it leaking out the bolts? New gaskets required. You might not have noticed there were even gaskets on there, as they get dry, hard and crushed.

    If you don't know for sure, dry the petcock off, then dust it with baby/talcum powder to find out where the leak is really occurring.
    '83 GS650G
    '83 GS550es (didn't like the colours in the 80's, but they've grown on me)

    Comment


      #3
      Gaskets,
      Items 4 and 6 in this fiche.
      sigpic
      Steve
      "The world is a book, and those who do not travel read only one page."
      _________________
      '79 GS1000EN
      '82 GS1100EZ

      Comment

      Working...
      X