.png "Powered by vBulletin")
I have a GS550e frame with a 650e engine fitted, I have a 750 swingarm and back wheel with all its spacers etc. Will this swing arm and wheel line up ok with my frame & engine?
-
-
I'm curious to know as well... I had some wheel alignment issues where the wheel in a 77 GS550B was almost rubbing on the right side but the chain tensioner marks on the dropouts were telling me it was off the opposite direction. It's been laid down before, so I assume it's bent. the 550B is drum rear, so I will have to weld on brake stay mounts on the bottom, but the 550E should be rear disc. I don't have the 550 here to compare to this 750 swingarm currently.
Also have the top end to make it a 673cc...whaddya know!'77 GS750 920cc heavily modded
'97 Kawasaki KDX220R rugged terrain ripper!
'99 Kawasaki KDX220R rebuild in progress
'79 GS425 stock
PROJECTS:
'77 Suzuki PE250 woods racer
'77 GS550 740cc major mods
'77 GS400 489cc racer build
'76 Rickman CR1000 GS1000/1100
'78 GS1000C/1100 -
What year models are they?Originally posted by Jimbo View PostsigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike
1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.Comment
Comment