"79" gs750L steering head bearings
Have any of you replaced the OEM steering head bearings with "ALLBALLS" bearings? The steering stem lower yoke(along with ALLBALLS bearing) doesn't come fully into the steering head frame housing. Races are in as far as they can go, but the bottom of the bearing(part housed with a seal) is exposed. Now the bearing adjuster ring and the crown bolt are sitting on slightly less thread of the stem. The plate welded to the base of the steering head still comes in contact with the steering stem lower yolk to inhibit excess handlebar rotation. The two plates come in to contact just shy of halfway of what they originally did. Is this a problem? How do I remedy this considering these bearings are supposed to work for my bike? Any help would be awesome, Thanks.
Required reading for all forum users!!!
Welcome!
Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.A note to new registrants...
All new forum registrations must be activated via email before you have full access to the forum.A Special Note about Email accounts!
DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.A note to old forum members...
I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.
Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...
New users should be sure to read the FAQ as well as the posts in the Announcements forum. This will answer many of the questions you may have about how this forum works.
Before posting questions in the forums be sure to use the forum search function!!! Odds are your question has already been asked and answered before. And when posting, please make sure that you post to the correct forum.
Finally, be sure to check out BassCliff's website here. He has useful information that can't be found on this site. His welcome page containing useful GS information can be found here. Be sure to check it out!
If you are a returning visitor to the forum and can't log in using your old forum name and password, chances are your account is deleted. Just create a new forum account and you should be all set.
?1996 - 2026 The GSResources, All Rights Reserved.
Powered by vBulletin® Version 6.2.0
Copyright © 2026 MH Sub I, LLC dba vBulletin. All rights reserved.
Copyright © 2026 MH Sub I, LLC dba vBulletin. All rights reserved.
All times are GMT-5. This page was generated at 07:20 AM.