Clean your oil sump strainers

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hayabuser
    Forum Sage
    • May 2013
    • 1134
    • Sidney BC

    #1

    Clean your oil sump strainers

    I've been working away on a 1980 GS1100E project bike that I picked up cheap and was in desperate need of some TLC. I tackled the oil/filter change yesterday and dropped the oil sump pan to check the condition of the oil pick-up/strainer located inside. Many owners neglect this item, some don't even know that it's in there, but if it plugs up with debris, your engine will starve of oil.

    The oil pick-up/strainer:



    The crap that was inside of mine:



    Some of the stuff looked like wood shavings, no idea where that came from.

    Where the pick-up/strainer mounts on the bottom of the engine, under the sump pan:



    The pan gasket was only $10.99 at my local Suzuki shop and the job took barely 20 minutes to complete on top of the regular oil change. It will take less time next time since it will likely be a lot cleaner and therefore won't need a 10 minute bath and rinse to clean it out.

    Do it today!
    2005 Suzuki Hayabusa
    2010 Suzuki GSX1250FA
    2015 BMW RnineT


    Dave
  • Jmanor

    #2
    I will be doing this in mid winter. Picked up a 82 GS1100GL and by the looks of neglect and having it sit for many years, I am sure this needs to be done. Been tackling sanding/polishing parts of engine and ordering stuff but this project will be on the list.

    Comment

    • rustybronco
      Forum LongTimer
      Bard Award Winner
      GSResource Superstar
      Past Site Supporter
      • Jul 2005
      • 14961
      • Marysville, Michigan

      #3
      Looks like old gasket material and (or) possibly RTV. My guess is old base gasket material.
      De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

      http://www.thegsresources.com/_forum...35#post1625535

      Comment

      • Guest

        #4
        While you got the engine down, put the 750 oil gears in it.

        Comment

        • 1980GS1000E
          Forum Sage
          Past Site Supporter
          • Aug 2007
          • 1664
          • San Diego, California, USA

          #5
          Originally posted by mrbill5491
          While you got the engine down, put the 750 oil gears in it.
          Yes, I was thinking of doing that. Do you have the part numbers?
          Current Rides: 1980 Suzuki GS1000ET, 2006 H-D Fatboy, 2021 BMW K1600B

          Comment

          • blowerbike
            Forum Guru
            GSResource Superstar
            • Aug 2008
            • 7057
            • Ohio Closer to KY Than Cleveland

            #6
            Originally posted by 1980GS1000E
            Yes, I was thinking of doing that. Do you have the part numbers?
            no #'s but there around 280 bucks now from suzuki.
            i sold a dozen or so sets at 80 per pair for used ones.

            Comment

            • 1980GS1000E
              Forum Sage
              Past Site Supporter
              • Aug 2007
              • 1664
              • San Diego, California, USA

              #7
              Ok, well so much for that right now.
              Current Rides: 1980 Suzuki GS1000ET, 2006 H-D Fatboy, 2021 BMW K1600B

              Comment

              • Gregory
                Forum Sage
                Past Site Supporter
                • Sep 2012
                • 2064
                • Southlake - DFW - North Texas

                #8
                WOW I don't know how I missed this post when posted. This may just be the reason an 1100e could run hot.
                82 gs1100e FAUX Skunk
                80 gs1000s

                Comment

                • Rob S.
                  Forum Guru
                  Past Site Supporter
                  • Dec 2013
                  • 9385
                  • New York City

                  #9
                  Originally posted by Gregory
                  This may just be the reason an 1100e could run hot.
                  Put an 1150 cooler (and filter cover) on your 1100EZ. I did. You'll be very pleasantly surprised at the difference in temp.
                  1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

                  2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.

                  Comment

                  • Gregory
                    Forum Sage
                    Past Site Supporter
                    • Sep 2012
                    • 2064
                    • Southlake - DFW - North Texas

                    #10
                    Thanks Rob, I will keep my eye out for one. What years of 1150 coolers will fit on an 821100e?

                    My only reservation about the cooler is how it affects using the sight glass to check the oil level.

                    BTW I'm not trying to hijack or change thread.... but it is all relevant and related.
                    82 gs1100e FAUX Skunk
                    80 gs1000s

                    Comment

                    Working...