Stock 1984 1150

[Guest]

First stock bike ive ever owned. I have rotten turn signal stalks?? I guess they all do this. Now what do yo ureplace them with ? I like to keep it stock appearing! Are there aftermarket parts that resemble the stock piece? Thanx Mike

[rapidray]

Mike, I use the threaded lamp rod. Cut off the turn signals at the first rib, figure out the length of rod needed, cut the rod & epoxy it into the turn signal. Let it dry, bolt it on & you have an inexpensive repair & shorter turn signals that look MUCH better!!
Ray.

[madmikeracing]

Thanx Rapid Ray!!

Mike, I use the threaded lamp rod. Cut off the turn signals at the first rib, figure out the length of rod needed, cut the rod & epoxy it into the turn signal. Let it dry, bolt it on & you have an inexpensive repair & shorter turn signals that look MUCH better!!
Ray.

I was hoping somewhere there were a bunch of replacement ones aftermarket stock appearing Ray. I have a questuiion. I did call you but ,,,I have a small end 25 mm crank and wondered about a self start setup. How much ?
myemails
avmmachine@rogers.com Thanx Mike