1981 GS650G choke adjustment?
Collapse
X
-
1981 GS650G choke adjustment?
I dont have any of the original tools. I really dont like using a screw driver to tap the choke knob out or in. Is there a specific tool Suzuki made to adjust the choke. My hands and arms are WAY to big ti reach in and adjust it.Tags: None -
There's a knob on the end of the choke cable. Sits up on the steering head. Is yours missing? -
I am trying to picture that in my mind.
The only two adjustments that I know of are the slack adjuster at the carbs and the threaded nut at the steering stem.
I don't remember either of them needing a screw driver.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Comment
-
Curly MikeComment
-
1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben FranklinComment
-
Guest
You're calling it the 'choke knob' when it's really the idle adjustment knob, right? and tapping gently on one of the raised knurls with a light hammer tap and the right sized screwdriver in the direction you want to go won't do anything, except raising or lowering the idle, hopefully.Comment
-
Yes,, you are probably in tune with this guy! I have small heat resistant hands so easy for me to reach in and adjust mine. Of course, last time that I did was maybe 4 years ago- set And forget.You're calling it the 'choke knob' when it's really the idle adjustment knob, right? and tapping gently on one of the raised knurls with a light hammer tap and the right sized screwdriver in the direction you want to go won't do anything, except raising or lowering the idle, hopefully.1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben FranklinComment
-
1983 GS 1100 Guided Laser
1983 GS 1100 G
2000 Suzuki Intruder 1500, "Piggy Sue"
2000 GSF 1200 Bandit (totaled in deer strike)
1986 Suzuki Cavalcade GV 1400 LX (SOLD)
I find working on my motorcycle mildly therapeutic when I'm not cursing.Comment
-
sparki
really? choke and idle adjustment confused about which is which?
i have big hands and have never had issues adjusting that screw... with or without gloves
Comment
-
I think you might be looking at the idle adjustment knob
(part #73 here: http://www.partsoutlaw.com/oemparts/...etor-model-z)?
For that you could use a screwdriver to turn, if its bushing is bad. No reason at all to do so if the carbs are clean and the tuning is good.
As mentioned, the choke adjustment on your year 650 should be a pull knob in the middle of the steering head. If that and its cable are missing, then you can always use the end of the choke rail on the left hand side of the carbs to hold the choke open during warmup.'83 GS650G
'83 GS550es (didn't like the colours in the 80's, but they've grown on me)Comment
-
Curly Mike
What a DICK. I used the wrong word. You are a Forum Mentor with that attitude and sarcasm? What a joke you are. So sorry I used the wrong word. Idle is what I meant. No way your big hand or your big mouth fits in that space. REALLY????Comment
-
What an ass hole.
Have fun with your messed up choke or throttle or whatever the heck it is.Comment
-
Comment
-
New moron who doesn't know a choke from a throttle looking for help and calling those who offer it a DICK doesn't deserve a whole lot of grace.Comment
Comment