Instrument swap?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Guest
    #1

    Instrument swap?

    I am curious, can I substitute Honda gauges for originals? I know finding an original, good condition 1983 GS1100 instrument cluster is as hard as finding the body of Jimmy Hoffa, and I am wondering if I can use something like early CB750 gauges (or similar) and is the speedo drive on my GS the same ratio as on an older Honda? Also, would the tach cable mate from the drive on the valve cover to the Honda gauge? I can fab a mount but I need to know if they will actually function? Thanks.
    Tags: None
    • Rob S.
      Forum Guru
      Past Site Supporter
      • Dec 2013
      • 9488
      • New York City
      #2
      Originally posted by oregonjake
      I know finding an original, good condition 1983 GS1100 instrument cluster is as hard as finding the body of Jimmy Hoffa...
      Posplayr might have one.

      I have an '82 (85 mph speedo) I'd let go.
      1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

      2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.

        Comment

        • posplayr
          Forum LongTimer
          GSResource Superstar
          Past Site Supporter
          • Dec 2007
          • 23673
          • Tucson Az
          #3
          I have a really nice one still but it will not be cheap. 11,800 miles and very clean.

            Comment

            • Jedz123
              Forum Guru
              Past Site Supporter
              • Jul 2009
              • 5686
              • Centeral, Vermont
              #4
              Originally posted by oregonjake
              I am curious, can I substitute Honda gauges for originals? I know finding an original, good condition 1983 GS1100 instrument cluster is as hard as finding the body of Jimmy Hoffa, and I am wondering if I can use something like early CB750 gauges (or similar) and is the speedo drive on my GS the same ratio as on an older Honda? Also, would the tach cable mate from the drive on the valve cover to the Honda gauge? I can fab a mount but I need to know if they will actually function? Thanks.
              I say give it a whirl... You could also use an electronic tach and wire it up off the ignition coils...
              There is always this option too... Brand new:

              $120 gets you a complete setup...
              Gauges and Instruments
              http://www.dimecitycycles.com/motorcycle-parts/motorcycle-gauges-and-instruments.html
              Whether you are building a chopper or working on a full restoration. we carry the gauges and instruments to suit your needs. We have full-size and mini chrome speedos in kilometers-per-hour and miles-per-hour form. You have the option of a white or black face speedometer, and either use a custom bracket or your existing stock one. We also have tachometer cables and speedometer cables, in either black or grey.

              But I would wander around Ebay First...

              My 2 cents... If you have a CB cluster kicking around give it a whirl... I think they all use the same ratio.

                Comment

                • Guest
                  #5
                  Posplayr, PM me with price and shipping. I am sitting down and ready for the price. Thanks. BTW, my GS has 12,500 miles so your gauges will match pretty closely. Also remember that I am a starving student (at 61 no less) so try to be kind.

                    Comment

                    • Guest
                      #6
                      oregonjake, check your PM.

                        Comment

                        Previous template Next
                        Working...