Locating the rear wheel

[Cipher]

is part 16 swapped in the place of part 6?

[Cipher]

naw that wouldhave the opposite impact. strip her down is number 7 on the fiche correctly located?

[Cipher]

look like two spacers doubled on the left side

I'm finishing up my 630-530 conversion, and having trouble re-locating the rear wheel. I'm not missing any pieces according to the parts diagrams, but I can't tighten the caliper bracket bolts without "grabbing" the rotor. The caliper doesn't seem to be locating itself correctly.

- I've tried keeping them loose, setting the adjustment screws on the swingarm on both sides to match, and that doesn't help.
- The caliper axle castle nut is loose to allow play while I'm trying, but doesn't seem to make a difference.

I'm including a couple pictures here. I'm also unsure if I'm supposed to have so much clearance on the left side of the bike after the chain- I can't find a picture to compare to.

Thanks everyone for all the help going above/beyond the service manuals.

Pictures: http://imgur.com/a/HwvJn

Jeff