.png "Powered by vBulletin")
How do you attach the clips holding the silver tail trim to the tail on a GS1000S?
-
thefirstnowell -
A little pressure to spread them and slide them up from the bottom.
There are a couple pics in this post in case you have never seen them installed.
2@ \'78 GS1000 -
Clips? Those are hard to find. I would love to get a set.Current Rides: 1980 Suzuki GS1000ET, 2006 H-D Fatboy, 2021 BMW K1600BComment
-
got it from ebay
can't figure out how to copy link but store is D's Cycle Connection (seller details: d_on_rr)thefirstnowellComment
-
I would never trust them to stay on but themselves, that's why they are hard to find. I'd glue them for sure.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533Comment
-
Mine were gone on my GS850 along with the trim. I bought a replacement from Suzuki years ago that was made out of a light gauge aluminum and glued it on with JB Weld.78' GS1000EC
79' GS850GN
79' GS1000N
79' GS1000EN
81' GS1100EXComment
.png)
Comment