Announcement
Collapse
No announcement yet.
Chain conversion for 1100E
Collapse
X
-
Anonymous
If you're going to need a spacer you can tell now. That front sprocket you took off, is it flat on both sides or does it have a lip on one side around the big hole?Originally posted by bradleymaynar
-
bradleymaynar
It has a slight lip. I haven't taken the sprocket off the bike yet, so I don't know if there's a spacer behind it. The one on the floor is the OEM sprocket and it wasn't on the bike when I got it.Originally posted by mopolopoIf you're going to need a spacer you can tell now. That front sprocket you took off, is it flat on both sides or does it have a lip on one side around the big hole?Originally posted by bradleymaynarOkay, so I got home and pulled the cover and it was just as I suspected, but frighteningly worse. The nut holding the front sprocket was LOOSE! 8O If it didn't have the folded washer I'd have lost the sprocket! Notice the "shiny" sides!
Brad tt
Brad tt
Comment
.png)
Comment