Retuning Carbs? - $66 4 Carb Rebuild (With Correct Jets)

[Anonymous]

Rebuilding and rejetting my carbs and after a little research, I think I found the cheapest way to do it. Just passing some info on to you other Guys. The problem I found was the rebuild kit was $20-25 with the wrong jets, and the jets were $6 apiece. Here's some cheap parts.

$12 Rebuild Kit (no jets).
$9 per 4 main jets (you specify size)
$9 per 4 pilot jets (you specify size).


If you're just experimenting with jet sizes it's only $9 a pop instead of $25.

[nert]

hey, nice stuff, thanks for the tip

[Anonymous]

Sweet !

This'll save me a few bucks !

TYVM !
-D Payne

[KEITH KRAUSE]

Be absolutely certain that the rebuild kit jets are sized the same as your existing jets.
For example: Mikuni sizes their jets by the cc's of fuel that will pass through in one minute. 130 cc's=130 main. A Dynojet main is sized by the actual size of the hole. Example: 1.30mm=130 main.
So a 130 Mikuni jet isn't the same as a 130 DJ. A 130 Mikuni jet is about the same size as a 138 DJ jet. Charts are available on the web.
Ask the maker about their sizing method. If they don't know, I suggest only buying the same brand of jet as you have.

[SqDancerLynn1]

Those are OEM jets so the should be fine

[Anonymous]

Ya, those are OEM.

Those are OEM jets so the should be fine

[Anonymous]

anyone know anywhere that cheap in the UK? Cheapest I've found is 12 POUNDS per set of four (mains) (I reckon thats about 20 dollars). ??