Can't get enough of these carbs..

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Anonymous

    #1

    Can't get enough of these carbs..

    Hey All,
    Back again, I'm one of the many still fighting with the 79 GS 1000L carbs. I've tried all the suggestions & none seem to help. I'm going to remove the carbs again & resoak them for a couple of days & see if that helps. I only soaked them several hours worring about the plastic parts. I have another question, I have a 79 GS 850 I got for parts. I haven't tried this yet but would the stock airbox off it fit & provide enough air flow for my 79 GS 1000 ? It appears that if might be easier to wrestle into the area that held the stock box on the 1000. I would have to go back to my stock #95 mains from #120's probably. I'm not so sure I want pods on anyway if I'm going on long rides as unstable as the weather is in Wyoming. The 1000 has a Suzuki 4 into 1 exhaust & I don't have the stock ones. Will this combo possibly work, 850 stock airbox, #95 jets, & really clean carbs???
    Thanx for all your help...
    God Bless,
    ..TJ...
  • Jethro
    Forum LongTimer
    Charter Member
    GSResource Superstar
    Past Site Supporter
    • May 2002
    • 17888
    • The only Henniker on earth

    #2
    Hy TJ,

    If it's any consolation, I rode the other day in a soaking rain for hours, with my pod filters I had no problem. Not trying to talk you out of the stock air box mind you, just letting you know I was worried too, and it turned out fine.
    Currently bikeless
    '81 GS 1100EX - "Peace, by superior fire power."
    '06 FZ1000 - "What we are dealing with here, is a COMPLETE lack of respect for the law."

    I ride, therefore I am.... constantly buying new tires.

    "Tell me what kind of an accident you are going to have, and I will tell you which helmet to wear." - Harry Hurt

    Comment

    • Detman101

      #3
      Same here. My pods run fine in the rain all day.
      My rain pants however... :roll:
      Lets just say my butt gets real wet.
      :x

      Comment

      • Anonymous

        #4
        Thanx for the tip guys. They pods are Emgo's..Any ideas on the 850 airbox fitting/flow ??
        ...TJ...

        Comment

        • Detman101

          #5
          I have no info on what to do with the "Airbox" setup.
          I threw mine away when building the bike's carbs and never looked back.
          :?

          Comment

          Working...