Electrical Gremlins! - anyone want to take a stab at this?

[Anonymous]

The part number for that little post spring and cap assembly is
#57465-18601, it is called Contact holder and is priced @ $2.54 at www.worldofcycles.com That part number is good for both the left and right hand switches as that part is the same in both switches.
The left hand and right hand switch has a little black plastic cover it's part number is #57481-33010 called Terminal Bace C priced @ $3.35
You can purchase the entire brake switch assembly, switch screws, wiring harness, post etc... the number for the entire assembly is #57460-45500 priced @ $20.94. I got mine on ebay for $8.... They dont show a part number for the clutch safety switch but you could use the brake switch for the safety switch because they are identical except the wiring color is different. For the Brake switch the wires are Orange/Green stripe and White. The colors for the Safety switch are both Yellow/Green stripes. They both do the same thing are identical in size shape and will work.

[Anonymous]

Thanks. I'm taking apart the brake side tonight and will order what I need. I cracked the housing on the one attached to the clutch lever. Cranked it down too hard and busted it.

[Anonymous]

I had taken mine apart on both sides and someone in another post mentioned something I failed to remember, when you loosen the bolts spin the handle so the bottom is facing up, this way the screw post and spring will be sitting in the switch and wont fall out, makes for wokring on it a LOT easier...