stuck oil pan

[Anonymous]

i tryed to remove the oil pan on my 82 gs 650 and i made sure all the bolts are out how do i get it to drop with out prying on it. thanks

[scotty]

tried a sharp puttey knife to slice into the gasket?????

[Billy Ricks]

A few light taps with a rubber mallet or a block of wood struck with a hammer should break it loose if you indeed have all the bolts removed.

[gspaul]

Double check for every bolt before you use any force!

[SqDancerLynn1]

Don't do like this guy Make sure to get a new gasket

http://www.thegsresources.com/_forum/viewtopic.php?t=40447

[BigMattyD]

That's so funny... that's what I was just thinking. Put away the crow bar and go get the 12 mm socket (or whatever it is)...

Matt