Announcement
Collapse
No announcement yet.
Bolt on stator leaking oil
Collapse
X
-
my98xplorer
Bolt on stator leaking oil
I replaced my stator and ever since ive had a lot of problems with oil leaking from the stator cover. I just went to discount auto and they had a roll of do it yourself gasket, so i bought that, cut out the gasket and put it on. So far everything looks good, exept for the bottom bolt on the stator cover. It consistantly drips oil, not bad, but its getting on my nerves. Is there any sloution for this? Ive tried thread lock and ive put gasket sealant around it but still no luck. Any suggestions?Tags: None
-
scotty
Re: Bolt on stator leaking oil
i believe that one of the bottom bolts may have had an o ring. I use black permatex on all those bolts when i replace either cover.Then i let it dry overnight ands retorque before adding fluidOriginally posted by my98xplorerI replaced my stator and ever since ive had a lot of problems with oil leaking from the stator cover. I just went to discount auto and they had a roll of do it yourself gasket, so i bought that, cut out the gasket and put it on. So far everything looks good, exept for the bottom bolt on the stator cover. It consistantly drips oil, not bad, but its getting on my nerves. Is there any sloution for this? Ive tried thread lock and ive put gasket sealant around it but still no luck. Any suggestions?
-
SqDancerLynn1
I had the stator cover off on my 850 ended up with a leak
Turns out I missed a very small piece of the old gasket..
Comment
-
scotty
Lynn, I guess the extra careful and gentle cleaning of the surfaces should always be a firstOriginally posted by SqDancerLynn1I had the stator cover off on my 850 ended up with a leak
Turns out I missed a very small piece of the old gasket..
Comment
-
beby99
Also check the rubber grommet that the generator wires pass threw...
oil can get past this and leak down side of cover and appear to be
coming from bottom bolt.....ask me how I know (after replacing gasket
twice)
Comment
-
my98xplorer
hmmmmmmOriginally posted by beby99Also check the rubber grommet that the generator wires pass threw...
oil can get past this and leak down side of cover and appear to be
coming from bottom bolt.....ask me how I know (after replacing gasket
twice)
Comment
-
DMPLATT -
my98xplorer
Actually thats kind of far for the old GS, not sure it would make it. I trust it driving around town, but thats pretty far north for me. I would love to go, but its about 2 hours for me to get there, and i dont wanna risk it.Originally posted by DMPLATTSoooo, I guess you are getting ready for our little Florida Run on the 24th? :roll: 8)
Comment
-
my98xplorer
ok guys i bought an o ring and put it on. I checked about 10 minutes later and still leaking!! I dont know what to do!
Comment
.png)
Comment