Need some MC carbs rebuilt from the ground up.

[devildog0]

Anyone know of ANYONE that specializes in doing this or has a parts hook up so they can get the properparts to do the job. I have a hard time finding all the parts I need.

I have a 79 GS1000 that needs a complete carb overhaul and also has a pilot needle broke in it that we cant get out at all.

We also have an 80 CB650 that needs the same treatment but has 2 pilot needles broken in it.

Both are mechancial carbs NOT CV carbs.

If anyone can point me in the right direction I would greatly appreciate it. The carbs are the only things keeping these bikes from running like new and I REALLY want to get the GS running it was my greatgrandfathers and I want to restore it to factory or close conditon. Thanks in advance for any help.

[Billy Ricks]

There's a guy that post here in the Medina Lake area that does carb work. Look for post by wiredgeorge. He has a wesite too.

[devildog0]

Found a guy here in Texas down in the hill country that specializes in rebuilding these carbs exactly the way I want them to. Thanks for all the help. I'm going to give him a call and order up a set of carbs.\

Thanks a ton Billy you pointed me in the right direction.

[Guest]

Cool. Glad you got the hook up, Josh! Will be good to see another ole GS up and running.:-D

[BRycraft]

Rebuilt Carbs

There is a guy in Texas George Lesho lesho@truevine.net He rebuilds and repairs carbs and even tests them. He is a very good honest man who stands behind his work. I had some missing and damaged parts that he took care of no extra charge. Strongly recommend
Good Luck Bill

[devildog0]

Thats the guy I'm sending the carbs to.

[BRycraft]

Carbs

GReat, he is very nice and wont do you wrong, i had the screens missing in all 4 of my carbs, he ordered and replaced them no charge, also did some work on one of the bodies that was damaged when someone messed up a thread for a jet. He really takes his time and does a good job.
Glad to hear it...
Good Luck Bill