Plug gap

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #1

    Plug gap

    I have just put a Dyna S with 3 Ohm coils on my '78 GS1000 and was wondering if I should be changing my plug gap from the one listed in the manual. If it makes any difference i have Taylor ignition wires and am running the stock b8es plugs.

    I read another thread with regards to plug gap with accell coils and the one response was 0.032in which seems pretty wide to me.
  • Guest

    #2
    I kept mine the same on my 1000. Runs great!

    Comment

    • Guest

      #3
      ok, if that is the case, what should i set them at? The manual is from 23-31 thou. Not trying to be a bother but i want my bike to preform to the pinical of it's potential.

      Comment

      • Carter Turk
        Forum Sage
        Charter Member
        • May 2002
        • 2281
        • Bellingham Washington

        #4
        I'm running .035 with my 3 ohms Dynas. Seems like more flame is a good thing and these coils should provide it.
        GS\'s since 1982: 55OMZ, 550ES, 750ET, (2) 1100ET\'s, 1100S, 1150ES. Current ride is an 83 Katana. Wifes bike is an 84 GS 1150ES

        Comment

        • Einar J Skog

          #5
          Hi
          I use that gap on my Bosch silver plugs,as Bosch recomended for GS1100G.

          Comment

          Working...