Intake Tube O-Rings Grease

[fr8_pilot]

For those of you familair with Autozone, would a $1 packet of their disc brake grease work well for the intake tube o-rings? It should be high-temp and not damage rubber if it's for disc brakes, right? I don't need much. Thanks

[tconroy]

For those of you familair with Autozone, would a $1 packet of their disc brake grease work well for the intake tube o-rings? It should be high-temp and not damage rubber if it's for disc brakes, right? I don't need much. Thanks

Wheel bearing grease is ideal as long as it is high temp.I used wheel bearing marine grease.

[ghwrenchit]

For those of you familair with Autozone, would a $1 packet of their disc brake grease work well for the intake tube o-rings? It should be high-temp and not damage rubber if it's for disc brakes, right? I don't need much. Thanks

It will be fine. Brake grease is usually silicone based high temp & water proof, good stuff.

ghwrenchit

[fr8_pilot]

Thank you!

[Macmatic]

I use SilGlide from NAPA parts stores. Comes in a ... I think 5oz tube for about $5 and lasts me about a year per tube. I use it on almost anything that slides and its great for the intake o-rings too.

/\/\ac