Kreem tank cleaner/liner

[Road_Clam]

I've used Kreem, and that junk pretty much ruined a good tank. Complete worthless garbage, IMHO. Many here have also had problems with Kreem. I don't know why it is so much easier to find, but it sure as heck doesn't work much of the time.

Por15 is much better stuff -- there are a lot of satisfied users, and the coating actually works as advertised. Por15 also sells a stripper to remove the remnants of a krappy kreem coating.

Iv'e Kreemed 3 different tanks with ZERO issues. The #1 issue with poor results is RUSHING the job (I am NOT insinuating the you did either). Kreem will NOT fill some pinholes. Tanks thet are badly rusted, often get far worse during the prepping process before the Kreem. I use small fine stones and give the tank the "shake-N-bake" treatment to uncover bad rust, then I check the pinholes by filling the tank with some fuel to get an idea if it's worth Kreeming or not. Some tanks simply are too far gone to try and save. The worst spots are deep down