83 GS1100E gas tank question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #1

    83 GS1100E gas tank question

    OK, just starting to work on my new 83 GS1100E project, trying to figure out what holds down the back side of the tank. Mine just came right off once I pulled the seat off, is there a bracket or strap on the back side that holds it in place, or attaches it to the frame? Surely the seat being there isn't the only thing that holds it in place, although on this bike, it apparently was??? What am I missing? Any help would be greatly appreciated, thanks!
  • lord1234

    #2
    There should be at least 1 bolt holding it on...

    Comment

    • frosty5011
      Forum Guru
      • Jan 2003
      • 5882
      • Northeast Alabama

      #3
      Originally posted by 82GS1100E_Tornado
      OK, just starting to work on my new 83 GS1100E project, trying to figure out what holds down the back side of the tank. Mine just came right off once I pulled the seat off, is there a bracket or strap on the back side that holds it in place, or attaches it to the frame? Surely the seat being there isn't the only thing that holds it in place, although on this bike, it apparently was??? What am I missing? Any help would be greatly appreciated, thanks!
      Supposed to be a bracket there, held down by 4 screws/bolts (2 on each side). The tank is bolted down to that bracket.
      Frosty (falsely accused of "Thread-Hijacking"!)
      "Make it idiot proof and someone will make a better idiot."

      Owner of:
      1982 GS1100E
      1995 Triumph Daytona 1200

      Comment

      • Guest

        #4
        bracket

        OK, so I guess I'm missing the bracket! Anybody got an extra??

        Comment

        Working...