Rear Caliper Question

[thatdood]

My 82 GS750E does not at the moment have a rear brake caliper or caliper support brace. Will a caliper and support brace from another model GS750, like an L or an EZ fit my bike, or do I have to get one from a 750E? I would refer to my manual, but it's in the mail, so I figured I'd ask you guys. Thanks!

thatdood

[8trackmind]

My 82 GS750E does not at the moment have a rear brake caliper or caliper support brace. Will a caliper and support brace from another model GS750, like an L or an EZ fit my bike, or do I have to get one from a 750E? I would refer to my manual, but it's in the mail, so I figured I'd ask you guys. Thanks!

thatdood

Check the part numbers on the bike bandit site to see if they are the same.
I might have the parts, but the caliper will need to be rebuilt...

[thatdood]

I think the part number is either 69100-08C00-999 or 69100-45020. I found these at www.mrcycles.com

[8trackmind]

I think the part number is either 69100-08C00-999 or 69100-45020. I found these at www.mrcycles.com

See if thats the same one that fits a 78 GS1000...If it is, let me know and I'll check my "parts stash" when I get home tonight.

[thatdood]

It seems as if it is.

Here's the page.

http://www.mrcycles.com/fiche_section_detail.asp

thatdood

[8trackmind]

It seems as if it is.

Here's the page.

http://www.mrcycles.com/fiche_section_detail.asp

thatdood

I'll check and see if I still have the caliper. I'm sure I have the bracket that the caliper mounts to though.

[thatdood]

I'll check and see if I still have the caliper. I'm sure I have the bracket that the caliper mounts to though.

Thanks, my man. I'll check back on this post tonight.

[8trackmind]

Thanks, my man. I'll check back on this post tonight.

[thatdood]

Cool 8track,
I wasn't as clear as I should have been earlier. I have the mounting bracket in the top picture. I need the caliper and the torque link that connects to the frame up by the bottom of the side cover. Sorry for the miscommunication.

But anyway, how much for the caliper? And if you have the torque link, I'll take that, too.

thatdood