What's wrong with this picture?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • thatdood

    #1

    What's wrong with this picture?

    This is the rear caliper for my GS750. Shouldn't there be wire clips that hold the pads onto the caliper body? Or am I stuck in the world of automotive brake replacement?

  • nert

    #2
    there is on my 1100
    check BikeBandit microfishies

    Comment

    • louisciccoli

      #3
      There are 2 different wires on my 78 GS1000. One holds the pads down while the other (where the 2 wires are twisted together on yours) runs from one pin to the other through the holes that are there.

      Comment

      • ptm

        #4
        This is from a slightly different model, but it had a clearer picture of the part. What you need is #9.

        Comment

        Working...