GSX550ES Fairing

[Thomas Kenny]

Does anyone know where I might find the body fairings that cover the sides and bottom of the GS550ES. I believe they were fitted only to GSX550ES European models as my Haynes manual shows. I have been looking at ebay and googling with no luck. Thanks

[skreemer]

I know for a fact lockhart phillips had after market lowers... look for GS550EF (F for Full Fairing)... not too sure how rare they are though...

[Thomas Kenny]

Thanks Skreemer, I check out Lockhart but could find nothing. I am checking with two junkyards who say that have a GS550EF for parts.
:-D

[moto_dan]

http://www.airtech-streamlining.com/...0ES1982-85.htm

[Thomas Kenny]

[IMG]file:///C:/Documents%20and%20Settings/Thomas.Kenny/My%20Documents/My%20Pictures/GS550EF.jpg[/IMG]

[Thomas Kenny]

[IMG]file:///C:/Documents%20and%20Settings/Thomas.Kenny/My%20Documents/My%20Pictures/GS550EF.jpg[/IMG]

[Blastatiion]

you must be looking for these

[oldschoolorange]

I am almost positive that Ultimate cycle in Hamilton Ontario has some as this is where I got my set from http://www.ultimate-cycle.com/

[Thomas Kenny]

Thank you for the information I have sent them an inquiry.

Tom

[MelodicMetalGod]

Gsx550es?

Is that an accurate model designation? I have an 1985 GS550ES and I was curious that there was a GSX550ES. I went to the model info at TheGSResources.com home page and took a peak and their tables indicate that there is no X model in the 550 size. Just trying to make sure that I understand the model you're working with.

[distraction628]

The GSX550ES was out of the USA....IE ...Europe, ect

[Nerobro]

in suzuki's infinite wisdom, they did not call 4 valve GS's, GSX in the US. The 83-86 GS550 is really a GSX550 ;-)

And like skreemer said, you're looking for EF fairing parts.