front forks

[Guest]

fitted a set of progressive fork springs 15wt oil the front end still
feel to soft put in 10lbs of air they top out just wondering if other
people had same problem . thinking about 5psi in each leg.
sorry forgot to this is on a Gs1000s.

[Guest]

You don't need to run air with your progressive fork springs. Increase the dampening with the pc pipe that came with your springs.

[SqDancerLynn1]

As starting point the spacer should extend 1/2-1" above the fork tube with it fully extended

[emjay]

I did the same for mine last spring, no air though. I think my PVC tubes have slightly more than an inch sticking out the top of the tube.

[Guest]

gs forks

thanks guys never got a spacer with them made a 1 inch spacer
found it to much I would reckon half inch would be about there.
thanks for your help