Best place to get valve-train parts

[dardoonk]

Where is the best place to get valves, springs, etc.. for my bike. I've got a 2 valve 750 (1977). Probably, I will be going to over-size pistons (Wisco kit) when I rebuild, but I don't foresee getting radical or anything, so I suspect stock components will suffice.
If I should be going to stronger springs or "better than stock" on anything, feel free to throw your 2 cents in.

BTW: I've rebuilt my VM's & will probably get a V&H 4-1 header. What kind of HP does one end up with with the BB Kit anyway?

[Dan Ruddock]

Stock cam stock springs. Performance cam performance springs. "better than stock" In most cases the stock part is the best for most applications, all depends on what you want the bike to do. Dan

[crag antler]

For stock parts, I have always had luck with Bike Bandit

[SqDancerLynn1]

Unless you are using some serious cams stick with the stock springs. Some people have used a GS850 top end on the 2v 750 motor with suscess Or if you can fine a good one put a GS1000 motor in it

[madjack57754]

APE, Big Jay supports the site We should support him.....

[Guest]

Part number VS750S

http://www.aperaceparts.com/