will these work
[-o< need carbs. air mixture screws were stubborn and so was i, carb body possibly felt the wrath..in need of advice...will any of these setups work .thanks guys[-o<
-
-
You have BS32SS Mikuni carbs. They are 32mm. They are constant velocity (CV) carbs. If you find a rack of these I'd rebuild them and swap out the stock jets from yours.
All the carbs racks you listed are from later models and might require different intake boots, pod filters and major rejetting. -
yea thats what i was lookin at i knew my size but was unsure if that really mattered as long as i could get everything to "mate" correctly...i appreciate the feedback and if you know of anyone with a spare rack of these 32 cv's id be more than happy to take them off your handsComment
-
Post in the parts wanted section.
I'll keep an ear on fleabay.Comment
Comment