1981 GS1100EX BS34SS carbs. I have two sets, but #1 carb has broken float post,other set has round off jet top.The one under little metal cap also #1 carb. Can I replace it with #2 #3#4 or is this a no can do?They are OME#49200. Have set of OME#49220 I belive from 1983 unknown model,are they interchangable with my other carbs? Thanks for any advice.
-
-
Just swap the jets and needle and add it to the rack. -
Individual carbs are different as far as I know you need to swap 1 with 1 2 with 2 etcComment
-
Yeah
Yeah, they can only be assembled one way.1980 GS1100E....Number 15!
Comment
-
Now that my brain works after a good night sleep. You can't switch carbs on the bank with a diferent number carb. Take the #1 with the rounded idle mixture screw to a machine shop and get it removed. Then switch all the jets add to the rack.
You can also fix float posts with JB Weld. Do a search on this because it's been talked about here many times.Comment
Comment