Out of the blue oil leak

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • Dave8338
    Forum LongTimer
    Past Site Supporter
    • Aug 2006
    • 11608
    • Annandale, MN
    #31
    That would be the one.....:? :-D

      Comment

      • Guest
        #32
        may as well retorque while the cam cover gasket is off

          Comment

          • natedees
            #33
            Derwood - can you define "retorque"? I have already installed this gasket once, and had a leak as soon as the engine warmed up the first time. I thought I was meticulous when installing the gasket - any tips out there to get it done right with no leaks!?

              Comment

              • GS1100GLMLA
                #34
                Natedees,

                Yes, that is the correct gasket. I will be replacing mine. Make sure you have all the old gasket material off and the metal surfaces are clean. Also make sure your new gasket is seated and positioned correctly when you put the cam cover back on.

                  Comment

                  Previous 1 2 3 template Next
                  Working...