Like I said before it is a 550, an E model. I'd bet the fork seals are junk, that is probably why the fluid is low. You could just use some PVC pipe on top of the springs to add some pre-load, 1 or 2 inches would be plenty, just make sure the cuts are straight and square.
-
-
There is a current ebay listing for a gs 550 e
I thas all kinds of useful bits
whole bike is being parted out and it has low miles according to the seller
that is a gs 550 L 550 e HybridComment
-
The ES models have a half fairing, which though it might've been missing, it doesn't have the mounts for it. So, you're correct, E model.Comment
Comment