83 GS 750 E rear wheel spacer

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Unclesol
    #1

    83 GS 750 E rear wheel spacer

    I am in the process of swapping my rear wheel, and it looks like some parts are missing. There is supposed to be a spacer between the caliper mount and the chain tension adjuster on the disc side of the rear axle bolt (according to my factory shop manual), but mine is missing, and the local dealer says the part is discontinued. Just wondering if anyone either has a spare, or would know what the dimensions are so I can get one made. Thanks for any help...
    Tags: None
    • Unclesol
      #2
      ... any help would be greatly appreciated.

        Comment

        • gustovh
          Forum Sage
          Past Site Supporter
          • Oct 2006
          • 4995
          • Vernonia
          #3
          I have a 750L, I could pull the spacer on that one if it will do you. PM me and I will get back to you early next week.
          Gustov
          80 GS 1100 LT, 83 1100 G "Scruffy"
          81 GS 1000 G
          79 GS 850 G
          81 GS 850 L
          83 GS 550 ES, 85 GS 550 ES
          80 GS 550 L
          86 450 Rebel, 70CL 70, Yamaha TTR125
          2002 Honda 919
          2004 Ural Gear up

            Comment

            • spyug
              #4
              Yesterday I pulled off the back wheel to clean the swing arm and replace the chain on my 83 750 E. There were only two spacers that came off. One on the sprocket side about 1" thick and one top hat about 1 1`/4" on the brake disk side between the bearing and the caliper mount. There are no others on my bike.

              I can't measure them for you just yet as my bike is in the shop for certification. I'm hoping to have it back later today.

              Hope this helps.

              Cheers,
              Spyug.

                Comment

                • fgh
                  #5
                  Bike Bandit shows them as available. See http://tinyurl.com/2fezkd, Item 6 or 11.

                    Comment

                    • Unclesol
                      #6
                      Originally posted by spyug
                      Yesterday I pulled off the back wheel to clean the swing arm and replace the chain on my 83 750 E. There were only two spacers that came off. One on the sprocket side about 1" thick and one top hat about 1 1`/4" on the brake disk side between the bearing and the caliper mount. There are no others on my bike.

                      I can't measure them for you just yet as my bike is in the shop for certification. I'm hoping to have it back later today.

                      Hope this helps.

                      Cheers,
                      Spyug.
                      Thanks for the help, and good luck with the cert! Nice to know there is another one of these on the road in the neighbourhood...
                      Last edited by Guest; 06-08-2007, 12:40 PM. Reason: spelling

                        Comment

                        • Unclesol
                          #7
                          Originally posted by fgh
                          Bike Bandit shows them as available. See http://tinyurl.com/2fezkd, Item 6 or 11.
                          Thanks !!!

                            Comment

                            • Guest
                              #8
                              When I changed to an 82 1100E rear rim I needed a spacer so I bought some washers and it worked out fine.

                                Comment

                                Previous template Next
                                Working...