A ? about stator on 1980 GS850G

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jforce11

    #1

    A ? about stator on 1980 GS850G

    I have a 1980 GS850G and I wanted to put a set of small driving lights on it to give more me light I drive a lot at night. I put them on and a couple days later my battery went dead so I got a new one and a couple days later it went dead. The lights are to much of a draw for the stator to keep up with is there any way to get more charging power out of it or can it be replaced with a bigger one ? I don't know a lot about this thing so any help would be great.
  • Steve
    GS Whisperer
    • Jun 2005
    • 35925
    • southwest oHIo

    #2
    Unless you are VERY meticulous and wind one for yourself, you won't get much more capacity for your charging system. One alternative is to get 35-watt bulbs from Electrical Connection. The 40 watts you save (for two bulbs) is another 3+ amps, and every little bit helps.

    Other things that can help...do you have them on all the time? Would it help to only have them on with high-beams? Either way, it would be best to have them on a separate switch so you can turn them off when you get into town and will not be running the engine as fast.


    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment

    • Guest

      #3
      See the stator papers. http://www.thegsresources.com/gs_garage.htm

      Could be as simple as cleaning the connections and grounding the R/R to your battery.
      I cut all the bullet connections from the stator and R/R off my bike and soldered them together and used shrink wrap on them. It brought back an ailing charging system back to spec!

      Comment

      • jforce11

        #4
        Thanks

        Thanks for the info guys. I will give cleaning a try and smaller bulbs. I,ll post back and let you know if it works.

        Comment

        Working...