Splitting The Cases Gs1100g

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • slob

    #1

    Splitting The Cases Gs1100g

    I'm about to split the cases and would have taken the top off the bottom, but the way I'm reading the manual I have it is telling me to have the motor upside down and take the bottom off the top. I am concerned crap will fall out everywhere.

    Which way should I do?
  • Baatfam
    Forum LongTimer
    Past Site Supporter
    Super Site Supporter
    • Jul 2006
    • 18696
    • Knoxville, TN

    #2
    Do it the way the manual says....
    Take the bolts out of the top, turn it over, take the bolts out of the bottom and lift the bottom off....

    I just did my 1100E for the first time and that's the way I did it.....nothing feel out.

    Good luck,
    Bob T.
    Bob T. ~~ Play the GSR weekly photo game: Pic of Week Game
    '83 GS1100E ~ '24 Triumph Speed 400 ~ '01 TRIUMPH TT600 ~ '67 HONDA CUB

    Comment

    • slob

      #3
      Thanks, lot of metal in sump this is going to be interesting.

      Comment

      • Baatfam
        Forum LongTimer
        Past Site Supporter
        Super Site Supporter
        • Jul 2006
        • 18696
        • Knoxville, TN

        #4
        Originally posted by slob
        Thanks, lot of metal in sump this is going to be interesting.
        Take the pan off before you turn it over. You'll need to take the oil filter and cover off also.
        Bob T. ~~ Play the GSR weekly photo game: Pic of Week Game
        '83 GS1100E ~ '24 Triumph Speed 400 ~ '01 TRIUMPH TT600 ~ '67 HONDA CUB

        Comment

        Working...