'83 GS1100GL...Will later carbs work?

[jtolbert]

So, I have an '83 GS1100GL that has given me no end of carburetion issues, mostly due to failure of o-rings, gaskets, etc. A friend has a set of 36mm carbs off a GS1150...Will those work on my 1100? I know I'd have to switch to pod-style filters, which isn't a big concern.

Does anyone know the size of the o-ring that goes between the fuel lines between the carbs and the carbs?

[jtolbert]

Actually, they're off a GSXR1100...Apparently they'll work.

[Nessism]

Have your current carbs rebuilt PROPERLY and your carb problems will stop. They are very simple devices and perform very reliably if properly cared for.

Going a different set, particularly with pods, will only add to your carb headache.

[Guest]

The GSXR carbs will work and add almost instant throttle performance. You will have to jet them and by the time you're done if you get done you will be a pro.