I'm trying to help a new person here with a pair of these 'two-barrel' carbs. I've found that a few of the O-rings from the 'normal' CV's will fit, and they cross-reference OK, using the exploded diagrams on Flatout (and elsewhere).
The question is -- these exploded diagrams are not complete. They don't show any type of mixture screw, and I know there must be one (per carb). I recall a few people have hashed through this business with the O-ring quandry. How did it turn out?
... or, does anyone have a link to an actual complete exploded diagram, showing a mixture screw?
I'd like to get this information down pat once and for all.
The question is -- these exploded diagrams are not complete. They don't show any type of mixture screw, and I know there must be one (per carb). I recall a few people have hashed through this business with the O-ring quandry. How did it turn out?
... or, does anyone have a link to an actual complete exploded diagram, showing a mixture screw?
I'd like to get this information down pat once and for all.
Comment