Can you use a GS1000 Carburetor on a GS850?

[bcrowther]

I know this may be a little over the top and I did read a lot before asking this question. This is for the 1980 + GS line. Can the carbs be interchangeable? Can you use a GS1000 Carburetor on a GS850?

[80GS1000]

If the 850 uses 34 mm CV carbs, then yes, you can use them.

Where in Utah are you? I'm in Sandy.

[bcrowther]

Sweet ride!
I live in Richfield.

[mortation]

MOST of the parts for an 850 & 1000 are the same. If its the same year check the part numbers on a site like alpha-sports or flatoutmotorcycles.com. I would think they are the same.

[bcrowther]

http://www.motorcyclecarbs.com/CARBU...50_1_P9195.cfm
Take a look at this link. They say that this carb will fit a 850, 1000, 1100 and the 1150. Will all of the carbs interchange like this? Or do you need to modify a little?

[80GS1000]

If you want, we can stop by with the GS1000 carbs to see if they fit. The 1000 has the stock 34mm Mikuni CV carbs. PM me if you're interested.

[Steve]

I know this may be a little over the top and I did read a lot before asking this question. This is for the 1980 + GS line. Can the carbs be interchangeable? Can you use a GS1000 Carburetor on a GS850?

Physically, they should fit. They will, however, need to be re-jetted.


.

[bcrowther]

Physically, they should fit. They will, however, need to be re-jetted.


.

So all you need to do is get the right jets and your set?