When you sync carbs are you supposed to have external adjusting screws? My 81 gs850L has no external adjustments. Please dont tell me to use the search feature because I did not see this type of question. Thanks Guys
-
-
On the throttle linkage of each carb there is a lock nut and an adjuster screw. If it is a four cylinder only #3 doesn't have one. -
If you look closely on the engine side of the carbs, between the intake tubes, you will see the adjusters. Kinda hard to see the one between #2 and #3 without pulling the tank, but it's there. 8-[
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Between
As Steve says, don't look at the carbs....look between them.1980 GS1100E....Number 15!
Comment
Comment