81 GS450 Engine rebuild

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • whig-it

    #1

    81 GS450 Engine rebuild

    I own a 1981 GS450S. I got it running a few months ago, got about 100 miles on it and the motor died. What happened was i was ridinr, lost all power and now it doesn't stary and makes a weird bottem end noise. Jusding by the noise, neither rod is broken, and i have no clue what happened. The timing chain is fine, and it gets spark.

    Now my question is where can i find parts to rebuild the motor. I have found a full gasket set, but that's about it. Also is there anyone that makes uprgade parts, like big bor kits, or pistons, ect. thanks for any help
  • SqDancerLynn1

    #2
    If you want to do it I would look for a later GS500 motor & do a transplant

    Comment

    • whig-it

      #3
      I think that's what i will do. I was looking @ that a while ago before the motor went. Is there any piston kits for the 500 to raise the c/r?

      Also where can i find 450 parts, i woudl still like tot rebuild the motor for a go-kart or something. thanks

      Comment

      • Nessism
        Forum LongTimer
        GSResource Superstar
        Past Site Supporter
        Super Site Supporter
        • Mar 2006
        • 35788
        • Torrance, CA

        #4
        Ebay is your best bet. 450's were made for a lot of years so there is a pretty good supply of used parts.
        Last edited by Nessism; 07-29-2007, 11:10 PM.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment

        Working...