How similar are the frames between a GS and a Kat

[HiSPL]

Found some info on bracing some frames, but its for a Katana and I wanna know if it could work for a GS?

Check it out

http://www.robbynitroz.nl/patrick/hardcorekats/articles/gsx_frame_stiff/

[Anonymous]

Don't know why not. Doesn't look very different from my frame.

http://webpages.charter.net/pejackson/GS1100ERebuild3.htm

http://webpages.charter.net/pejackson/GS1100ERebuild4.htm

And I don't notice anything that would blocked or restricted by the added braces.

[Anonymous]

Actually did just notice something. And he mentions it on his page. Can't use the airbox with the X braces right behind the engine..

[Dink]

Tim I dont see a problem with using this as a guide to brace your own frame. Even with the small differences between a Katana frame and yours you can at least apply the same principles across.
Dink

[HiSPL]

Thanks guys...
I already am planning on pod filters so the airbox thing won't be a problem. BTW, this is based on the Yoshimura Kat :twisted:

[saaz]

The principles are the same. Just make sure you look at what you have to move or get rid of when doing the bracing!