What is the parts interchangability between a 1981 gs1100e and a 1983 gs 1100e in the engine department I really need to talk to somebody
Rocky 530 209 5510 [-o<
Rocky 530 209 5510 [-o<
-
-
You can always use one of the on-line parts listings and check part numbers back and forth between the different years. http://www.alpha-sports.com/suzuki_parts.htm
What in particular are you trying to figure out?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
engine swap
Is a 1980 gs1100 16 valve chain drive engine the same as a 1983 gs1100 16 valve
chain drive engine Rocky 530 209 5510Comment
-
The MAJOR differences(which are minor) are a 25 mil left end on the crank & smaller inner diameter on the charging rotor to fit the small left end crank. (Same as early 82s.) 20 bolt valve cover on the 80 & 81 versus 24 bolt on the 82 & 83. Crank wasn't welded on the early small end cranks even into 82. The cylinders & cases & heads & most every part is interchangable in the GS 1100 16 valvers & a LOT of 1150 parts interchange also. You can also VERY easily install air cooled GSXR heads on GS motors! Ray.Comment
-
thanks you save me a couple hundred bucks
Thank you I almost bought the wrong motor for a starter clutch RockyComment
Comment