Pingle or stock petcock?

[N56629]

I'm sure they would make the appropriate adapter plate for you. If not I think they have adapter nuts to go from 3/8 to 22mm.

[80gs1000e]

I'm sure they would make the appropriate adapter plate for you. If not I think they have adapter nuts to go from 3/8 to 22mm.

Good point, I need to email them when I'm ready. Just put roughly 1,100 miles through that crappy automatic petcock over the weekend and it was OK. I still want to get rid of it.

[Pearson]

Good point, I need to email them when I'm ready. Just put roughly 1,100 miles through that crappy automatic petcock over the weekend and it was OK. I still want to get rid of it.

I too did the switch to Pingel after enlarging the holes. Capped off the vacuum line on the carb (critical step) and have had 0 problems. Last night I checked on a fill up and am getting 40mpg. I make it a habit to reach down and shut off fuel as I pull into the neighborhood.

Don't hesitate to call them. Good guys, but the first time the sales rep. steered me to the wrong version. They fixed it up quick tho.