1100 to 1150 swingarm conversion

[rjloope]

Looking for info and pictures of any conversion from dual shock to mono shock for my 81 1100 . I think its simple just wanna see where to weld brakets for mono

[rphillips]

anything is possible, but I'd think it would be a pretty complex modification. I'd also re-think this mod, I've got both, & if I were going to change mine, I'd put the 1100 setup on the 1150.

[80GS1000]

Looking for info and pictures of any conversion from dual shock to mono shock for my 81 1100 . I think its simple just wanna see where to weld brakets for mono

See Johnnay's thread. He monoshocked his 1100. I did the same to my 1000. If you're going to go through the trouble of all the welding and fab, you may as well go with the newest and stiffest one you can find rather than using an 1150 swingarm. The new swingarms are all designed to use a radial tire, which is a plus. The 05-06 GSXR 1000 swingarms are the same width at the pivot as the GS swingarms. If you want to know where to weld the brackets, study and take pictures of all the dimensions, angles and brackes of the donor bike you're going to use the swingarm from. That way it will work as the designers intended.

[Suzuki mad]

Have you check out here?

http://forum.oldskoolsuzuki.info/cgi-bin/Yabb/YaBB.pl

Suzuki mad