Mikuni jets

[chuckycheese]

I've decided to rebuild the carbs (along with a bunch of other stuff) on the GS1100 and would like to replace the after-market main and pilot jets with originals. I'm confused by the pictures and nomenclature and want to make sure I order the right ones...can anyone help? I know the sizes but the other numbers are confusing. (I could order them from the Suzuki dealer but they're much cheaper elsewhere.) Thanks!

[twr1776]

Not sure which carbs you have or jets you would need but Parts Unlimited sells Mikuni OEM jets and lists them by carb type and size.

[chuckycheese]

Thanks

Thanks! I think I've got the pilot jet figured out but the main jet is confusing me. It's got to be either the 100/604 or the 102/221. I'm thinking it's the 100/604 but don't feel certain enough to order them.8-[

[chuckycheese]

Thanks

Thanks! I think I've got the pilot jet figured out but the main jet is confusing me. It's got to be either the 100/604 or the 102/221. I'm thinking it's the 100/604 but don't feel certain enough to order them.8-[ The "RS" and "CV" designations are what has me stumped.

[twr1776]

I am not familiar with the RS carbs but the on mine the CV's have single numeric listings for the jet sizes. I am no expert but I thought the other Suzuki stock OEM carbs were VM's for the 80 & earlier models.

[Guest]

Use the drop down menu for sizes. Also see if you have any locol yocos have any jets. Could save on shipping time
http://www.denniskirk.com/jsp/produc...Id=41306&mmyId=

http://www.denniskirk.com/jsp/produc...Id=41306&mmyId=

[chuckycheese]

Thanks!

Thanks, Bill! I think I've got it straight now; I just hate ordering the wrong stuff!:?

[dtkid]

Hey Cheese:

I am currently rebuilding the carbs on my 1100E (1981).

The stock jets are as follows:

Pilot Jet: 45
Pilot Air Jet: 160
Main Jet: 107.5

[chuckycheese]

Thanks

Thanks! I know the sizes but there are a number of Mikuni jets that come in all of those sizes....and several of them look alike (especially in pictures).

[dtkid]

You might wanna try this:

Whenever I ain't absolutely sure about something I post here...........then if I still have a question I contact Jeff at Z1-Enterprises.

I can find you the web-locale for Z1-Enterprises if you can't find it on the site. Jeff is very helpful and he specializes in these machines (you probably knew that).